Argo AES Series Manual de Instruções Página 213

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 262
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 212
213
A
-Modell - 11/12 - Ausgabe 09/11 - 2096161 - BUE-0036-10EN
Wheels and tyres
13
13.3 Tyre specifications
13.4 Handling of tyres
Drive over kerbs at an obtuse angle. Otherwise the flanks of the tyres may
get pinched. Driving over a kerb at a sharp angle can damage the tyre and
result in it getting ruptured.
Drive over high manhole covers at a slow speed. Otherwise the tyres may
get pinched. Driving over a high manhole cover at high speed can damage
the tyre and result in it getting ruptured.
Check the shock absorbers regularly. Driving with poor shock absorbers
significantly increases wear.
If the tread wear is uneven, have the toe-in and the wheel camber checked.
Driving with an incorrectly set toe-in or a one-sided wheel camber leads to
a significant increase in wear.
Avoid block brakings. Block braking gives the tyres "brake plates" of var-
ying strength. This reduces driving comfort. It might even make the tyres
unserviceable.
Do not clean the tyres with a high-pressure cleaner. The tyres can suffer
serious damage within just a few seconds and rupture as a result.
Drive in such a way as to protect your tyres. Avoid braking sharply, revving
up too strongly and long journeys on poor roads.
13.5 Changing wheels
13.5.1 General instructions
Description Explanation
215/70 R 15C 109/107 Q
(example)
215 Tyre width in mm
70 Height-to-width proportion in percent
R Tyre design (R = radial)
15 Rim diameter in inches
C Commercial (transporter)
109 Load index code for single tyres
107 Load index code for twin tyres
Q Speed index (Q = 160 km/h)
X The vehicle must be on level, firm ground, secure from slipping.
X Go into first gear. In the case of automatic transmission, change gear to
"P" position.
X Before jacking up the vehicle firmly apply the handbrake.
X Prevent the vehicle from rolling away by blocking the opposite wheel
with the wheel chocks.
X Under no circumstances jack the vehicle with the fitted supports.
X If a trailer is connected: Detach the trailer before lifting the vehicle.
X Position the vehicle jack underneath the axle, not under any circum-
stances on the bodywork.
Vista de página 212
1 2 ... 208 209 210 211 212 213 214 215 216 217 218 ... 261 262

Comentários a estes Manuais

Sem comentários